Septum
Injection port septum
Parts | P/N | Appearance | Qty | Remarks |
---|---|---|---|---|
Injection port septum
|
221-48398-91 | 20 | For HT high temperature, brown, low bleed, 450℃ max., low bleed under a high temperature and highly durable | |
221-48972-91 | 20 | Long-life (LL), blue, low bleed, 450℃ max. | ||
201-35584-84 | 200 | Silicone rubber, white, injection unit temperature: lower than 250℃ | ||
201-35584 | 20 | Silicone rubber, white, injection unit temperature: lower than 250℃ | ||
221-76650-01 | 25 | Thermogreen LB-2, green, low bleed, least amount of plasticizing agent |
Injection
Silica wool
Parts | P/N | Appearance | Qty | Remarks |
---|---|---|---|---|
Silica wool
|
201-47616-84 | 2g × 5 pcs. | - | |
201-47616-01 | 2g | - | ||
Inert silica wool
|
225-09147 | 10g | - | |
221-48600 | 2g | - |
Glass insert components
Parts | P/N | Appearance | Qty | Remarks |
---|---|---|---|---|
O-ring
|
221-48393-91 | 4 | For split (graphite), for high temperature. Injection unit temperature: 350℃ to 450 ℃ | |
221-47222-91 | 4 | For splitless/WBI (graphite), for high temperature. Injection unit temperature: 350 ℃ to 450 ℃ | ||
036-11203-84 | 5 | Standard (fluororubber). Injection unit temperature: room temperature to 300℃ |
Glass insert (for capillary column)
Parts | P/N | Appearance | Qty | Remarks |
---|---|---|---|---|
Split-less
|
221-48876-05 | 5 | No wool, silanized | |
221-48876-03 | 5 | With wool, deactivated (95 mm, SPL) | ||
221-48335-01 | 1 | (95mm,SPL) | ||
Split
|
225-20803-01 | 5 | With wool, deactivated |
Glass insert
Glass insert (for capillary column)
Parts | P/N | Appearance | Qty | Remarks |
---|---|---|---|---|
Split
|
221-41444-01 | 1 | (95mm,SPL) |
Others
Sample pot (DI: For direct sample inlet unit)
Parts | P/N | Appearance | Qty | Remarks |
---|---|---|---|---|
Sample pot
|
225-09344 | 100 | Standard accessory, Pyrex | |
Quartz sample pot
|
225-09470 | 10 | Quartz |
Rotary pump oil
Parts | P/N | Appearance | Qty | Remarks |
---|---|---|---|---|
Rotary pump oil Ultragrade#15
|
017-30163-11 | 1L | For E2M1.5 rotary pumps,0.28 L/use |
Standard sample
Parts | P/N | Appearance | Qty | Remarks |
---|---|---|---|---|
Triazine
|
225-09493-05 | 1g | For high mass range MS calibration (m/z 1066), with certificate of traceability | |
225-09493-01 | 0.5g | For high mass range MS calibration (m/z 866), with certificate of traceability | ||
PFTBA
|
225-09493-03 | 5g | For MS tuning, with certificate of traceability |
Ion Source
TQ8050/TQ8040/TQ8030/QP2020/QP2010 Ultra/QP2010 Plus ion source
Parts | P/N | Appearance | Qty | Remarks |
---|---|---|---|---|
Insulator bush
|
225-01068 | 1 | Two are used in the repeller assembly. | |
Filament
|
225-10340-91 | 1 | Shared by EI/CI/NCI | |
EI ion source box (single unit)
|
225-17697-91 | 1 | Not including repeller assembly, heat treated | |
EI repeller assembly
|
225-17659-91 | 1 | Including insulator bushes, heat treated | |
CI ion source box (single unit)
|
225-17705-91 | 1 | Not including repeller assembly, heat treated | |
NCI ion source box (single unit)
|
225-17705-92 | 1 | Not including repeller assembly, heat treated | |
CI/NCI repeller assembly
|
225-17710-91 | 1 | Shared by CI/NCI, including insulator bushes, heat treated |