SALD-DS5 - 規格
Cyclone Injection Type Dry Measurement Unit for SALD Series
SALD-DS5
Cyclone Injection Type Dry Measurement Unit SALD-DS5 (P/N: 347-61707-20)
| Measurement principle |
Laser Diffraction and scattering |
|---|---|
| Measuring Type |
Cyclone Injection Type Dry Measurement |
| Measurement Range (Cyclone injection type dry measurement) |
0.8 to 1000µm (SALD-2201) |
| Measurement Range (Wet measurement):SALD-2201 |
0.8 to 1000µm |
| Measurement Range (Wet measurement):SALD-3101 |
0.8 to 3000µm |
| Operating Environment |
Temperature: 10 to 30 °C; humidity: 20 to 80 % (no condensation) |
* The combined dry/wet detector case is required to use the dry measurement unit. Be careful, as the Part No. differ with the model.
* A compressor (compressed air source) and dust collector (vacuum cleaner) are required to use the SALD-DS5.
SALD-DS5
Sampling Unit
| Sample suction types |
・ Cyclone type ・ One shot type ・ Hand shot type |
|---|---|
| Suction nozzle |
3 different types can be selected. |
| Dimensions & weight |
W 240 x D 210 x H 210 mm, 10kg |
| Communication method |
USB (PC control) |
| Power Requirements |
115V or 230V (±10%), 100 VA AC, 50/60 Hz |
SALD-DS5
Pressure (with filter)
| Secondary pressure |
0.05 to 0.5 MPa |
|---|---|
| Filtration rating |
Removing particles of 5 µm or larger |
| Connection to air source |
Tube of 6 mm outside diameter |
| Communication method |
USB (PC control) |
| Dimensions & weight |
W 130 x D 223 x H 233 mm, 3 kg |
| Power Requirements |
115V or 230V (±10%), 100 VA AC, 50/60 Hz |
| Primary pressure |
0.6 to 0.8 MPa |