GCMS-QP2020 NX - 相關耗材

GCMS-QP2020 NX 氣相層析質譜儀

Septum

Injection port septum
Parts P/N Appearance Qty Remarks
221-76650-01 221-76650-01 25 Thermogreen LB-2, green, low bleed, least amount of plasticizing agent
201-35584 201-35584 20 Silicone rubber, white, injection unit temperature: lower than 250℃
201-35584-84 201-35584-84 200 Silicone rubber, white, injection unit temperature: lower than 250℃
221-48972-91 221-48972-91 20 Long-life (LL), blue, low bleed, 450℃ max.
221-48398-91 221-48398-91 20 For HT high temperature, brown, low bleed, 450℃ max., low bleed under a high temperature and highly durable

Injection

Silica wool
Parts P/N Appearance Qty Remarks
201-47616-01 2g -
201-47616-84 2g × 5 pcs. -
221-48600 2g -
225-09147 10g -
Glass insert (for capillary column)
Parts P/N Appearance Qty Remarks
221-48335-01 221-48335-01 1 (95mm,SPL)
221-48876-03 221-48876-03 5 With wool, deactivated (95 mm, SPL)
221-48876-05 221-48876-05 5 No wool, silanized
225-20803-01 225-20803-01 5 With wool, deactivated
Glass insert components
Parts P/N Appearance Qty Remarks
036-11203-84 5 Standard (fluororubber). Injection unit temperature: room temperature to 300℃
221-47222-91 4 For splitless/WBI (graphite), for high temperature. Injection unit temperature: 350 ℃ to 450 ℃
221-48393-91 4 For split (graphite), for high temperature. Injection unit temperature: 350℃ to 450 ℃

Ion Source

TQ8050/TQ8040/TQ8030/QP2020/QP2010 Ultra/QP2010 Plus ion source
Parts P/N Appearance Qty Remarks
225-17705-92 1 Not including repeller assembly, heat treated
225-17697-91 1 Not including repeller assembly, heat treated
225-17705-91 1 Not including repeller assembly, heat treated
225-01068 1 Two are used in the repeller assembly.
225-10340-91 1 Shared by EI/CI/NCI
225-17659-91 1 Including insulator bushes, heat treated
225-17710-91 1 Shared by CI/NCI, including insulator bushes, heat treated

Others

Rotary pump oil
Parts P/N Appearance Qty Remarks
017-30163-11 017-30163-11 1L For E2M1.5 rotary pumps,0.28 L/use
Sample pot (DI: For direct sample inlet unit)
Parts P/N Appearance Qty Remarks
225-09470 10 Quartz
225-09344 100 Standard accessory, Pyrex
Standard sample
Parts P/N Appearance Qty Remarks
225-09493-03 5g For MS tuning, with certificate of traceability
225-09493-01 0.5g For high mass range MS calibration (m/z 866), with certificate of traceability
225-09493-05 1g For high mass range MS calibration (m/z 1066), with certificate of traceability

Glass insert

Glass insert (for capillary column)
Parts P/N Appearance Qty Remarks
221-41444-01 221-41444-01 1 (95mm,SPL)